C1300
Advanced circular chart recorder
3 Configuration
IM/C1300 Rev. J
55
3.14 Pen Function
Overview.
Trend Pens
– the chart range is configured independently of the engineering range (see Section 3.5, page 24) to enable a
selected part of the engineering range to be used for display thus giving extra detail on the chart.
Event Pens
– assigned to digital inputs, alarms, logic equation results and real-time events (if timer software option enabled by
installation of the appropriate software key).
Select Pen Range (in engineering units)
0
(Eng. Range Low)
1000
(Eng. Range High)
Select 'In' Source
Select 'Out' Source
700
(Pen Range High)
400
(Pen Range low)
*Source on
Source off
Source on
Source off
*In source takes priority if both
sources enabled
Record Function
Event Function
Pen 2 at 40%
Pen 3 at 60%
Pen 1
at 20%
*Pen 4 at 80%
Event Pen Chart Position
*With Real Time Event Pen
option fitted, Pen 4 is above
100%
Pen Function
Press the
key to open the
Main Menu
.
Highlight
Pen Function
.
Select Pen
Select the pen to configure.
Pen Function
Select the required pen function:
Off
– No function
Trend
– Trend
Event
– Event
Pen Source
Select an input source or math block for the selected pen as required.
Return to top of page.
Digital I/O
Analog Output
Modbus
Logic Equations
Data Logging
Clock
Pen Function
Calibration
Pen 1 Function
Off
Pen 1 Source
None
Select Pen
Pen 1
Select Pen
Pen 1
Off
or
Event
