manualshive.com logo in svg

ABB Busch-priOn Series, Техническое справочное руководство

Поделиться
Скачать
ABB Busch-priOn Series Скачать руководство пользователя страница 22

KNX Technical Reference Manual 

Busch

-

priOn

®

 

 

22 | 0073-1-7388 | KNX Technical Reference Manual 

 

Pos: 22.9 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/A - F/Dimmen, Wippe Links / Rechts @ 9\mod_1269423462609_15.doc @ 52694 @ 2 

 

Dimming, rocker left/right 

 

Pos: 22.10 /KNX/Applikationsbeschreibungen/Applikationen - App/Dimmen_Wippe_links_rechts/App. - Dimmen, Wippe links / rechts - DIN-A4 @ 9\mod_1269423217171_15.doc @ 52689 @ 2 

With the "Dimming, rocker left/right" application, a rocker switch has communication objects for switching and for dimming. A 
distinction is made between short (switching) and long (dimming) button contact. 
The "Dimming, rocker left/right" application does not differentiate between whether the rocker is operated on the left or right 
side. In each case, the application makes a separate set of parameters and communication objects available for the right 
and left side of the rocker. 
The application makes it possible to dim a light via one side of the rocker and to assign an additional "button-orientated" 
function to the other side. 
 

Dimming objects, rocker left/right 

No. Object 

name 

Data type 

Flags 

0 Switching 

1 Bit EIS2 / DPT 1.001 

C, W, T, U 

1 Relative 

dimming 

4 Bit EIS2 / DPT 3.007 

C, T 

 

Pos: 22.11 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Jalousie, Wippe Gesamt @ 9\mod_1269423899109_15.doc @ 52704 @ 2 

 

Blind, rocker total 

 

Pos: 22.12 /KNX/Applikationsbeschreibungen/Applikationen - App/Jal_Wippe_gesamt/App. - Jalousie, Wippe Gesamt - DIN-A4 @ 9\mod_1269423548328_15.doc @ 52699 @  

Via the application "Blind, rocker total", blind movement and/or slat adjustment commands can be sent to connected shutting 
actuators with a short or long contact of the rocker. A short button contact always triggers a slat adjustment or stop 
command and a long button contact always triggers a move command. 
The control always remembers the last action performed on the side of the rocker switch that is assigned with the "Blind, 
rocker total" application. If a blind was lowered and halted at half height via a short button contact, then a renewed long 
button contact will raise the blind. 
 

Blind objects, rocker total 

No. Object 

name 

Data type 

Flags 

0 Adjusting(1 

Bit) 

1 Bit EIS7 / DPT 1.008 

C, T 

0 

Adjusting (1 Byte) 

1 Byte EIS6 / DPT 5.001 

C, T 

1 Move 

(1 

Bit) 

1 Bit EIS7 / DPT 1.007 

C, T 

1 Move(1 

Byte) 

1 Byte EIS6 / DPT 5.001 

C, T 

 

Pos: 22.13 /Produkthandbuch - DIN-A4/Überschriften/2. Ebene/G - L/Jalousie, Wippe Links / Rechts @ 9\mod_1269424455828_15.doc @ 52715 @ 22 

 

Blind, rocker left/right 

 

Pos: 22.14 /KNX/Applikationsbeschreibungen/Applikationen - App/Jalousie_Wippe_links_rechts/App. - Jalousie, Wippe Links / Rechts - DIN-A4 @ 9\mod_1269424218921_15.doc @ 52710 @  

Via the application "Blind, rocker left/right", blind movement and/or slat adjustment commands can be sent to connected 
shutting actuators with short or long actuation of the rocker. A short button contact always triggers a move command and a 
long button contact always triggers a slat adjustment or stop command. 
The application "Blind, rocker left/right" makes a separate set of parameters and communication objects available in each 
case for the right or left side of the rocker. This facilitates control of a Venetian blind with one side of the rocker and 
assigning an additional "Rocker, left/right" function to the other side of the rocker. 
The control always remembers the last action performed on the side of the rocker that is assigned with the "Blind, rocker 
left/right" application. If a blind was lowered and halted at half height via a long button contact, then a renewed short button 
contact will raise the blind. 
 

Blind objects, rocker left/right 

No. Object 

name 

Data type 

Flags 

0 

Adjusting (1 Bit) 

1 Bit EIS7 / DPT 1.007 

C, W, T, U 

0 Adjusting(1 

Byte) 

1 Byte EIS6 / DPT 5.001 

C, W, T, U 

1 Moving(1 

Bit) 

1 Bit EIS7 / DPT 1.008 

C, W, T, U 

1 Moving(1 

Byte) 

1 Byte EIS6 / DPT 5.001 

C, W, T, U 

 

Pos: 22.15 /Spezial/Neues Layout 2010/Steuermodule_Neues_Layou+++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.doc @ 52149 @  

 

Содержание Busch-priOn Series



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды