Overview of product range
System Manual 2CKA001473B9577
│
11
2.2.3 ABB
flexTronics
®
In the following you will find an overview of actuators and sensors for the implementation of
lighting control via movement detectors flex.
The brief descriptions of the characteristics provide an initial orientation. For a detailed overview
of the characteristics and applications of the devices, see the following items:
■
Characteristics (device functions): see chapter 3 “Device Functions“ on page 23
■
Applications: see chapter 4.2 “Case studies“ on page 61
The following actuator versions are available for combining presence detector detector
attachments with actuators.
E-contact
64814 U-500
e-contact insert flex, 1-
gang
Residential applications and old installations in
locations where an N-busbar is not available.
– Noiseless
switching
of lighting systems.
– 2-wire connection (neutral busbar is not
required, but can be connected as an option)
64811 U-500
Relay insert flex, 1
gang
64821 U-500
Relay insert flex, 2
gang
For all popular applications
– Switching
of
lighting systems.
– 2gang relay insert is required for additional
heating, air conditioning and ventilation-
applications.
– 3-wire
connection
system (neutral
conductor is required).
64891 U-500
Sub-insert flex
For all popular applications
– Expansion of the detection range.
– Setup of extension operation.
– 3-wire
connection
system (neutral
conductor is required).
Dimmer
64851 U-500
LED dimmer insert flex,
1gang
For all popular applications
– The device is used for switching and/or
dimming lighting systems.
– 2-wire
connection system (neutral busbar is
not required, but can be connected as an
option).
