Operating Instructions
Busch
-
ComfortTouch
®
Operation
Operating Instructions | 1473-1-8041
— 21 —
Scenes / sequences (basic versions, which can be adapted further)
With the "Scene" control element the user can call up so-called scenes or sequences.
- In "scenes" several actions can be combined into one, so that the user can create, for instance, certain
lighting scenes with just one press of the button (= several dimming actions).
- Sequences (processes) are a special form of scenes. Not all grouped actions are started simultaneously in
one sequence such as in a scene, but one after the other in a predefined order.
Control element Status
Function
Scene
Scene can be called up:
Scene is running:
The "Scene" control element has a push-button for calling up a
scene.
Changes to the scene are indicated by an icon and can be stored.
This is done with a long press of the push-button. A progress bar is
displayed. An icon is displayed after the successful storage.
Note
The scene to be called up must be assigned appropriately in the
project planning software of the
Busch
-ComfortTouch
®
. Please
contact your electrical installer who will set up the
Busch
-
ComfortTouch
®
for you individually and according to your wishes.
Scene (List)
Scene can be called up:
Scene selection:
Scene is running:
The "Scene (List)" control element has a pop-up button for calling
up a list with different scenes. The list closes automatically after a
few seconds if no selection has been made. The scene must be
selected in the list. The scene is then started via the push-button.
Changes to the scene are indicated by an icon and can be stored.
This is done with a long press of the push-button. A progress bar is
displayed. An icon is displayed after the successful storage.
Note
The scenes must be assigned appropriately in the project planning
software of the
Busch
-ComfortTouch
®
. Please contact your
electrical installer who will set up the
Busch
-ComfortTouch
®
for
you individually and according to your wishes.
