44
AW T4 20 |
U N I V ER S A L 4 - W I R E , D UA L- I N P U T T R A N SM I T T ER | O I/AW T4 2 0 - EN R E V. B
… 13
Configuration (Advanced access level)
Media Card
Used to enable/disable data logging, select the source of the data to be logged,
save and load configuration files and to format external media.
Menu
Comment
Default
Data Logging
Channel 1 (to 6)
Select the source of the data to be logged – see page <?> for sources.
Sampling Time
Select the sampling duration time:
• 5/10/30 seconds
• 1/5/10/30 minutes
• 1 hour
5 s
Note .
The following menus are displayed only if an SD card is inserted and has been placed online.
Save Configuration
Select File
Config1 (to 8)
Select a position in which to create and save a configuration file containing user-defined sensor
parameters to external media.
Up to 8 files can be created. If a file exists in a position, it is displayed as
Config1(Overwrite)
.
Either overwrite the existing file or select a new position in which to save it.
Note
. Wait until the progress bar is complete and the
OK
soft key prompt reappears before pressing
the
key. Pressing
during a save operation cancels it prematurely resulting in an unusable
configuration file.
Load Configuration
Select File
Config1 (to 8)
Select a position from which to load a configuration file containing user-defined sensor parameters
from external media. The most recently saved file is displayed.
Press the
key to display a list of other positions containing configuration files.
Only positions containing configuration files are displayed.
Format Card
Press the
key (
Yes
) to format the SD card if required.
Note
. Formatting erases all data currently on the SD card.
Media Card
Exit
Menu
Select
