AW T4 20 |
U N I V ER S A L 4 - W I R E , D UA L- I N P U T T R A N SM I T T ER | O I/AW T4 2 0 - EN R E V. B
39
Display
Used to select the display language, setup
Operator
page templates (1 to 3), enable diagnostic,
view and log functions, set the device’s display brightness/contrast and set the time and date.
Menu
Comment
Default
Language
Select the display language:
English/German/French/Italian/Spanish.
English
Operator Templates
Page 1 (to 5) Template
Refer to page 27 for
Operator Template
examples.
Note
.
Operator Page
templates are assigned automatically to display all sensors currently connected
and cannot be changed – see page 27.
View/Log Enables
Select to enable/disable the following
Views
and
Logs
.
Diagnostics View
See page 29 for examples of
Operator pages
in
View
mode.
Enable (all)
Signals View
Chart View
Alarm View
Analog OP View
Calibration Log
See page 30 for examples of
Operator pages
in
Log
mode.
Alarm Log
Audit Log
Diagnostics Log
Chart View
Note .
Chart View
menus displayed only when
Chart View
is enabled.
The chart displays the primary analog value from the sensor.
Channel S1 (to S2)
Source
Chart View
channel sources are assigned automatically and cannot be changed.
Tag
Enter an alphanumeric tag (3 characters maximum) to identify the sensor signal on the chart.
TAG1
Chart Duration
Select a chart duration:
1, 2, 4, 8, 12, 16, 20, 24 hours
1 h
Display
Exit
Menu
Select
