ABB AWIN GW120, Руководство пользователя

Страница: 46 / 76

IP CO NFIGU RATION CO NFIGURATIO N
42 4JNO0 0030 8 A
6.10 IP Configuration
Click Configuration > Network Interface > IP Configuration in the left navigation column to
show the Local Area Network (LAN) configuration parameters.
Figure 18: IP Configuration screen
The buttons and fields in this window are:
– Link Speed and Duplex determines the speed of the communication channel. Leave the
setting at AUTO if not sure about the link speed. If manual option is selected, then the
connected device must be set to the same speed.
– Ethernet IP Configuration selects the method your network uses to obtain IP addresses.
If using static IP addresses, enter the IP address assigned to the gateway. Each device on
the network must have a different IP address.
If a DHCP server is on the network and will assign IP addresses to the AWIN GW120, click Use
DHCP to get an IP address radio button.
If the IP address is changed from the factory default, you will need to know this
to log back into the gateway for future configuration changes.
Enter a “LAN Default Gateway,” if desired.