manualshive.com logo in svg

ABB Arc Guard System TVOC-2, Руководство по установке и обслуживанию

Поделиться
Скачать
ABB Arc Guard System TVOC-2 Скачать руководство пользователя страница 55

Maintenance

53

Chapter 5: Maintenance

Introduction

The Arc Guard System requires maintenance once every year.

The yearly maintenance includes checking detectors, The Arc Monitor and 
the light from CSU (option).

Maintenance

To check the detectors and the Arc Monitor repeat the following steps: 

1. Simulate an arc by using a camera flash.

2. Set the camera flash to approximately 0.5 ms.

3. Place the camera flash at a distance between 1.5 -2 meters (60-80 inches) 

from the detector.

4. Make sure no object is standing in the way.

5. Point the camera flash towards the detector.

6. Press the flash test button.

Do the following steps to check the Arc Monitor:

1. Check the HMI display.

2. If the detector reacts correctly and causes a trip then it should show on the 

HMI display as a notification window.

3. The notification window shows, Trip has Occurred, which detector, which trip 

contact, at what time and date.

4. The breaker that is connected to the Arc Monitor should trip, depending on 

the configuration.

5. At the notification window, If manual reset is configured, press Reset. If auto 

reset is configured, press Menu.

Содержание Arc Guard System TVOC-2



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды