ABB ACS850 series, Руководство по оборудованию

Страница: 92 / 120

Mains chokes
92
Installation guidelines
• If an EMC filter is also installed, the mains choke is connected between the
supply and the EMC filter. See the diagram below.
• For optimal operation of the choke, the drive and the choke must be mounted on
the same conductive surface.
• Ensure the choke does not block the airflow through the drive module, and that
the air rising from the choke is deflected away from the air inlet of the drive
module
• Keep the cable between the drive and the choke as short as possible.
WARNING! The surface of the mains choke becomes hot when in use.
Connection diagram
~
AC supply
ACS850-04
CHK-xx mains choke
JFI-xx EMC filter (if present)
~
L1 L2 L3 PE
DC supply
U1 V1 W1
UDC+ UDC-
+ –
U V W PE
X Y Z