ABB ACS850 series, Руководство по оборудованию

Страница: 87 / 120

Technical data
87
Applicable standards
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standards EN 50178 and EN 60204-1.
• EN 50178 (1997) Electronic equipment for use in power installations
• IEC 60204-1 (2005),
modified
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device
- the ACS850-04 into a cabinet.
• EN 60529: 1991
(IEC 60529)
Degrees of protection provided by enclosures (IP code)
• IEC 60664-1 (2007), Edition
2.0
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
• IEC 61800-3 (2004) Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific
test methods.
• EN 61800-5-1 (2003) Adjustable speed electrical power drive systems.
Part 5-1: Safety requirements. Electrical, thermal and energy
Provisions for compliance: The final assembler of the machine is responsible for installing
the ACS850-04 in a cabinet that is protected to IP3X for top surfaces for vertical access.
• prEN 61800-5-2 Adjustable speed electrical power drive systems.
Part 5-2: Safety requirements. Functional
• UL 508C (2002), Third
Edition
UL Standard for Safety, Power Conversion Equipment
• NEMA 250 (2003) Enclosures for Electrical Equipment (1000 Volts Maximum)
• CSA C22.2 No. 14-05
(2005)
Industrial Control Equipment