ABB ACS380 Series, Руководство по оборудованию

Страница: 106 / 186

106 Technical data
Electric power network specification
Voltage ( U
1
) 200/208/220/230/240 V AC 1-phase for 200 V AC drives
200/208/220/230/240 V AC 3-phase for 200 V AC drives
380/400/415/440/460/480 V AC 3-phase for 400 V AC drives
+10%/-15% variation from converter nominal voltage is allowed as
default.
Network type Public low-voltage networks. TN (grounded), IT (ungrounded) and
corner-grounded TN systems.
Rated conditional
short-circuit current
(IEC 61800-5-1) 65 kA when protected by fuses given in the fuse tables.
Short-circuit current
protection
(UL 61800-5-1,
CSA C22.2 No. 274-13) US and Canada: The drive is suitable for use on a circuit capable of
delivering not more than 100 kA symmetrical amperes (rms) at
480 V maximum when protected by fuses given in the fuse table.
Mains choke Use a mains choke if the short-circuit capacity of the network at the
drive terminals is more than in the table:
You can use one choke for several drives if the short-circuit capacity
at the drive terminals is reduced to the value in the table.
Frequency (f1) 47 to 63 Hz, maximum rate of change 17%/s
Imbalance Max. ±3% of nominal phase to phase input voltage
Fundamental power
factor (cos phi) 0.98 (at nominal load)
Frame size/
Voltage rating R0, R1, R2 R3, R4
1-phase 230 V >5.0 kA >7.5 kA
3-phase 230 V >5.0 kA >7.5 kA
3-phase 380...480 V >5.0 kA >10 kA