ABB ACQ80, Руководство по прошивке

Страница: 262 / 390

262 Parameters
98
98 User motor parameters
Motor values supplied by the user that are used
in the motor model.
These parameters are useful for non-standard
motors, or to just get more accurate motor
control of the motor on site. A better motor
model always improves the shaft performance.
98.01 User motor
model mode
Activates the motor model parameters
98.02
…
98.12
.
Notes :
• Parameter value is automatically set to zero
when ID run is selected by parameter
99.13 ID
run requested
. The values of parameters
98.02
…
98.12
are then updated according to
the motor characteristics identified during the
ID run.
• Measurements made directly from the motor
terminals during the ID run are likely to
produce slightly different values than those on
a data sheet from a motor manufacturer.
• This parameter cannot be changed while the
drive is running.
Not
selected
Not selected Parameters
98.02
…
98.12
inactive. 0
Motor
parameters The values of parameters
98.02
…
98.12
are used
as the motor model.
1
98.02 Rs user
Defines the stator resistance R
S
of the motor
model.
With a star-connected motor,
R
S
is the resistance
of one winding. With a delta-connected motor, R
S
is one-third of the resistance of one winding.
0.00000
p.u.
0.00000…
0.50000 p.u. Stator resistance in per unit. -
98.03 Rr user
Defines the rotor resistance R
R
of the motor
model.
0.00000
p.u.
0.00000…
0.50000 p.u. Rotor resistance in per unit. -
98.04 Lm user
Defines the main inductance
L
M
of the motor
model.
0.00000
p.u.
0.00000…
10.00000 p.u.
Main inductance in per unit. -
98.05 SigmaL user
Defines the leakage inductance
σ
L
S
. 0.00000
p.u.
0.00000…
1.00000 p.u. Leakage inductance in per unit. -
No. Name/Value Description Def/
FbEq16