ABB ACH580-01 Series, Руководство по оборудованию

Страница: 29 / 396

Introduction to the manual 29
Quick installation and commissioning flowchart
Task See
Identify the frame of your drive: R1…R9. Operation principle and hardware description :
Type designation key on page 49
Plan the installation: select the cables, etc.
Check the ambient conditions, ratings and
required cooling air flow. Guidelines for planning the electrical
installation
on page 81
Technical data on page 243
Unpack and check the drive.
Check that all necessary optional modules
and equipment are present and correct.
Mechanical installation : Unpacking and
examining delivery, frames R1 and R2 on
page 59 ; R3 on page 61 ; R4 on page 63 ; R5
on page 65 ; R6…R9 on page 67
If the drive will be connected to another
system than symmetrically grounded TN-S
system: Check if you must disconnect the
EMC filter or ground-to-phase varistor. IEC: Checking the compatibility with IT
(ungrounded), corner-grounded delta,
midpoint-grounded delta and TT systems
on
page 116
North America: Checking the compatibility
with IT (ungrounded), corner-grounded delta,
midpoint-grounded delta and TT systems
on
page 170
Install the drive on a wall. Mechanical installation on page 53
Route the cables. Guidelines for planning the electrical
installation
: Routing the cables on page 102
Check the insulation of the input cable and the
motor and the motor cable. Electrical installation:
IEC:
Checking the insulation of the assembly
on page 114
North America: Checking the insulation of the
assembly on page 168
Connect the power cables. Electrical installation:
IEC:
Connecting the power cables on page
123
North America: Connecting the power cables
on page 178