ABB ACH580-01 Series, Руководство по оборудованию

Страница: 300 / 396

300 Technical data
CE marking
A CE mark is attached to the drive to verify that the drive follows the provisions of the
European Low Voltage, EMC and RoHS Directives.The CE marking also verifies that
the drive, in regard to its safety functions (such as Safe torque off), conforms with the
Machinery Directive as a safety component.

Compliance with the European Low Voltage Directive
The compliance with the European Low Voltage Directive has been verified
according to standard EN 61800-5-1:2007. The declaration of conformity
(3AXD10000437232) is available on the Internet. See section
Document library on
the Internet on the inside of the back cover.

Compliance with the European EMC Directive
The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-
3:2004 + A1:2012) covers requirements stated for drives. See section
Compliance
with the EN 61800-3:2004 + A1:2012 below. The declaration of conformity
(3AXD10000437232) is available on the Internet. See section Document library on
the Internet on the inside of the back cover.

Compliance with the European ROHS II Directive 2011/65/EU
The RoHS II Directive defines the restriction of the use of certain hazardous
substances in electrical and electronic equipment. The declaration of conformity
(3AXD10000437231) is available on the Internet. See section
Document library on
the Internet on the inside of the back cover.

Compliance with the European WEEE Directive
The WEEE Directive defines the regulated disposal and recycling of electric and
electrical equipment.

Compliance with the European Machinery Directive 2006/42/EC
2nd Edition – June 2010
The drive is a machinery component that can be integrated into a wide range of
machinery categories as specified in European Commission’s
Guide to application of
the Machinery Directive 2006/42/EC 2nd Edition – June 2010 . The declaration of
conformity (3AXD10000437229) is available on the Internet. See section Document
library on the Internet on the inside of the back cover.
Validating the operation of the Safe torque off function
See chapter Safe torque off function on page 345 .