Connection and installation
Product manual 2CKA001473B9425
│24
5.3
Installation
5.3.1
Requirements for window sensor installation
Windows with attachments or decorative strips:
■
Prior to the installation, check
whether there is a free space of 19
mm to all sides from the centre of the
square hole (total width of the
window sensor is 39 mm).
Square bar of window handle too long:
x
■
If the square extension is installed
and the window handle cannot be set
completely onto the window sensor,
the square bar of the window handle
may have to be shortened.
■
For this, install the window sensor.
■
Measure the gap between the
window handle and the window
sensor (Pos. X) and add 2 mm.
■
Shorten the square bar accordingly
using a metal-cutting saw.
Square bar of window handle too short:
■
If the square bar of the window
handle is too short, it can be
extended with the supplied
attachment.
