ABB-Welcome
Commissioning
| 1473-1-7868
— 9 —
Pos: 40 /B usch-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Doku me ntatio n/Übe rsch rifte n ( --> Fü r alle Doku men te < -- )/1. E bene /G - L/I nbet rieb nah me @ 11\ mod _12 791 854 969 77_ 15.d ocx @ 830 35 @ 1 @ 1
7
Commissioning
Pos: 41 /B usch-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Doku me ntatio n/In bet riebn ahm e/Dim me r/Inb etri ebn ahm e - 659 1 U-1 01 @ 19\ mo d_1 3119 487 810 23_ 15.d ocx @ 108 300 @ 2 22 @ 1
The following components are required to operate the Telephone Gateway:
- A Welcome door communication system including the System Controller and at least one Outdoor station.
- A PBX with analogue input
- At least one telephone for configuring via DTMF
For the initial startup of the Telephone Gateway, a few basic settings need to be made.
Two options are available for commissioning:
1. Via telephone, connected to the system
2. Via Internet browser and IP-Gateway 83342-xxx. For configuring the Telephone Gateway via the IP Gateway,
please see the manual of the IP Gateway.
7.1
Commissioning via telephone
1. Call the telephone gateway via your PBX
2. Enter Admin PIN
No.
Function
Command
Example or explanation
1
Enter Admin PIN
[*] [*] [*] Admin PIN [#]
The default Admin PIN is 1234
3.If the Admin PIN is correct, the telephone gateway enters the programming mode and the settings can be done as
followed:
No.
Function
Command
Example or explanation
1
Set Default phone
number
[7] [3] [6] [*] Default phone number [#]
2
Add a new Indoor
Station to phonebook
[2] [4] [7] [*] Indoor Station Number [#]
The Indoor Station Number can be 1
(or 01) to 99.
3
Add a range of indoor
stations phone book
[2] [4] [7] [7] [*] Indoor Station Number 1 [*]
Indoor Station Number 2 [#]
Indoor station number 2 must always be
greater than station number 1.
4
Add or change the
Primary and Secondary
phone number
[2] [*] Indoor Station Number [*] Primary
phone number [*] Secondary phone number
[#]
5
Add or change the
primary phone number
in the phonebook
[2] [*] Indoor Station Number [*] Primary
phone number [#]
To be used if the user does not want to
provide a Secondary phone number
6
Activate “Direct-accept”
Feature
[7] [3] [2] [1] [#]
7
Deactivate “Direct-
accept” Feature
[7] [3] [2] [0] [#]
If there are Indoor Stations in system, this
function should be activated.
8
Set New Admin PIN
[7] [*] [*] [*] New Admin PIN [*] [*] [*]
New Admin PIN [#]
9
Set New Master PIN
[7] [*] [*] New Master PIN [*] [*] +
New Master PIN [#]
10
Activate mandatory
usage of Indoor Station
PIN
[7] [4] [7] [1] [#]
11
Deactivate mandatory
usage of Indoor Station
PINs
[7] [4] [7] [0] [#]
