ABB-Welcome
Appendix
| 1473-1-7868
— 14 —
10
Appendix
10.1
Frequently-used commisioning
Use case: One apartment with one tel one telephone gateway.
User uses phone to call Telephone Gateway firstly, then
No.
Function
Command
Example or explanation
Step 1
Enter Admin PIN
[*] [*] [*] + Admin PIN + [#]
The default Admin PIN is 1234
Step 2
Set Default phone
number
[7] [3] [6] [*] + Default phone [#]
Step 3*
Add a new Indoor
Station to Telephone
Gateway phonebook
[2] [4] [7] [*] + Indoor Station [#]
Indoor Station Number could be one digit
or two digits, such as 1 or 01 to 99
Step 4
Set Primary/Secondary
phone number
[2] [*] + Indoor Station Number [*] + Primary
phone [*] + Secondary phone
[#]
10.2
Main commands of operation
When there is a call-in from Outdoor Station, and telephone is in normal standby:
No.
Function
Command
Example or explanation
1
Accept Call-in
[1] [#]
When there is no ongoing conversation between Outdoor Station and telephone, user calls the Telephone
Gateway.
1
Call Outdoor Station
[1] [1] [#] to [1] [4] [#] or [1] [#] or [1] [0] [#]
1.
11#--14# to call a special Outdoor
Station
2.
1# is also allowed; this will call the
Outdoor Station 1
3.
10# to call the OS from which the last
call has been made
Commands below can be done via telephone when there is ongoing conversation between Outdoor Station and
telephone:
No.
Function
Command
Example or explanation
1
Switch Light
[5] [#]
To turn on the light switch of the System
Controller or the door actuator
2
Open Door
[3] [#]
Open door during conversation with
Outdoor Station
=
