– Mount the controller (fig.1, item 7) onto the flush-
mounted UP coupler (fig.1, item 1) in such a way that
– the rear 10-pole plug connector is not canted;
– the fixing clips (fig.1, item 8) on the back of the unit
engage with the recesses (fig.1, item 2) provided
in the carrying ring of the UP coupler.
– Secure the controller in position via the screw (fig.1,
item 5) on the carrier ring of theUP coupler as follows:
– Pull off the rotary knob (fig.1, item 6).
– Tighten screw connecting controller with the carrier
ring of the UP coupler.
– Replace the rotary knob (fig.1, item 6).
Dismantling
– Pull off the rotary knob (fig.1, item 6)
– Remove the screw located underneath.
– Hold the covering frame and pull the controller off the
flush-mounted UP coupler.
Mounting / Dismantling
