Notes
Make sure the 10-pole connector of the UP coupler is
arranged so that the room temperature controller can be
mounted as desired.
The physical address of the room temperature controller
is set via the room temperature controller. It is
recommended to enter this physical address prior to room
temperature mounting. For this purpose proceed as
described under ”Start-up”
. Subsequent changes can be
made. For this purpose you must first disassemble the
room temperature controller.
Mounting
Before carrying out mounting work on the UP mains
coupler, make sure the 230V power system is
disconnected !
– Position the room temperature controller as required
for mounting.
– Fix the covering frame (fig.1, item 4) in mounting
position (the frame is held in position by the mounted
controller).
Mounting / Dismantling