ABB Robotics RobotWare 6, Руководство по применению

Страница: 54 / 82

If previously loaded configuration file does not have the correct settings,
change them to the values that apply to your servo gun. For information
about the measurement system, see
Application manual - Additional axes
and stand alone controller .
Active at Start Up and Disconnect at Deactivate only needs to be changed
if using a tool changer.
Tap Next .
xx1800000012
4 A restart is required for the changes to take effect. Tap Restart .
xx1700002051
5 After the restart, start the Servo Gun Setup wizard again.
Continues on next page
54 Application manual - Servo Gun Setup
3HAC065014-001 Revision: E
© Copyright 2021 ABB. All rights reserved.
3 Servo Gun Setup wizard
3.3 Commissioning mode
Continued