Art: 723085-00K Rev. Date: 30-OCT-2014
25
Paper
Paper may be ordered along with other supplies for the VetScan i-STAT 1 System.
The STATUS indicator will illuminate to indicate the print status:
Ready:
Green
Out of Paper:
Orange
Error:
Red
Paper for the i-STAT Printer can be installed or replaced as follows:
1. Open the paper compartment lid by pulling the release lever as shown in the printer
illustration on page 1 and remove any remaining paper.
2. Reel off a few centimeters of paper from the new paper roll, with the leading edge of
the paper feeding forward from the bottom of the roll.
3. Sit the new paper roll in the compartment such that the leading edge is resting outside
the compartment on the printer casing.
4. Close the lid until it snaps into place.
Note 1: Should the paper become creased or misaligned, simply reload the paper
as described above ensuring that the paper has a clean, straight edge.
Note 2: When removing a printout from the printer, pull the printout toward the front
of the printer and tear from one side to the other across the serrated edge.
Powering the i-STAT Printer Using the AC Adapter and Power Cord:
1. Connect the power cord to the AC adapter as shown.
2. Plug the round connector from the AC adapter into the
12VDC port on the back of the i-STAT Printer.
3. Plug the power cord into a wall outlet.
