Abarth 595, Руководство пользователя

Страница: 124 / 225

111
To replace the bulb, proceed as
follows:
apply leverage in the point shown
by the arrows (1) and (2) to compress
the fixing springs and extract the light
fig. 105;
turn the bulb holder anticlockwise,
extract the press-fitted bulb and
replace it;
105
AB0A0310C
refit the bulb holder in the lens, then
position the light, ensuring that the
fastening clip clicks into place.
DIPPED BEAM
HEADLIGHTS
To replace the bulb, proceed as
follows:
turn the protection cap (2) fig. 103
anticlockwise and remove it;
disconnect the connector (1) fig. 106
and release the bulb holder;
extract the bulb and replace it;
refit the bulb in its housing and
reconnect the connector;
refit the protection cap in its housing
and turn clockwise.
130)
106
AB0A0311C
MAIN BEAM HEADLIGHTS
To replace the bulb, proceed as
follows:
steer the wheel fully inwards, undo
the screws (1) fig. 107 and move the
inner wheel arch plastic cover (2) aside
to access the bulb;
2
1
107
AB0A0471
remove the rubber cap on the bulb
holder;
release the two bulb holding clips (1)
fig. 108;
108
AB0A0093C
extract the bulb and replace it;
fit the new bulb, making the outline
of the metallic part coincide with the
grooves on the reflector, then reattach
the bulb holding clips;
refit the rubber cap;
refit the inner cover on the wheel
arch and tighten the screws.
SIDE LIGHTS/DAYTIME
RUNNING LIGHTS
To replace the bulb, proceed as
follows:
steer the wheel fully inwards, undo
the screws (1) fig. 107 and move the
inner wheel arch plastic cover (2) aside
to access the bulb;
remove the rubber cap on the bulb
holder;