Abarth 595, Руководство пользователя

Страница: 110 / 225

97
request may adversely affect the
correct operation of the engine or the
transmission, the system will not allow
the gear change but will automatically
change down if the engine reaches the
idling speed (e.g. during deceleration).
the second, completely automatic
(AUTO), in which the system decides
when to change gear. A gear change
can be requested using the control
lever without having to deactivate this
mode: this function, known as “gear
suggestion”, suspends the automatic
mode for the time necessary to select
the gear requested by the driver.
24)
To turn automatic operation (AUTO) on,
press the A/M button on the gearbox
panel fig. 93; when it is on, the word
AUTO and the engaged gear are
shown on the display. When AUTO
mode is deactivated, the transmission
passes to MANUAL mode.
“Kick Down” function
The "Kick Down" function is also
available: if necessary (for example
when overtaking), pressing the
accelerator pedal fully over the
hardening point, the system downshifts
one or more gears (if the rpm allows it)
in order to provide suitable power and
torque for the acceleration requested
by the driver.
In this way the engine speed and
power can be suddenly increased and
then automatically restored when the
conditions set previously are resumed.
WARNING The use of the “Kick Down”
function is recommended only when
overtaking or accelerating quickly, in
order not to increase fuel consumption.
LEVERS ON THE
STEERING WHEEL
94
AB0A0335C
These enable sequential gear shifting.
wheel + (pulling stalk towards driver,
see fig. 95): shift up;
wheel
–
(pulling stalk towards driver,
see fig. 95): shift down.
95
AB0A0336C
96
AB0A0337C
The engagement of a lower (or higher)
gear is only permitted if the engine rpm
allow it.
25)
STARTING THE ENGINE
To start the engine press the brake
pedal: the system engages neutral
(N) automatically. When the starting
procedure is complete, you can hold
the brake pedal down and press button
(1) or the R button on the transmission