![ABANTERA ROM10H20CAT Скачать руководство пользователя страница 46](http://html.mh-extra.com/html/abantera/rom10h20cat/rom10h20cat_manual_450754046.webp)
46
|
SECURITY
INSTRUCTIONS
These installation and operating instructions contain relevant information regarding the safe
and efficient use of the
RO
M10H20
CAT
water dispenser unit. Despite all precautions, the use
of any product can pose a particular risk when not handled properly. All technical devices
require regular maintenance and inspection to function properly. Compliance with all the safety
and use instructions is a fundamental requirement for safe operation, in addition, the accident
prevention regulations and general safety measures in force in the location where the unit is
operated must be applied.
Security instructions
ATTENTION
Before carrying out maintenance work, the unit must be disconnected from the mains.
If the power cord is damaged in any way, it must be replaced by the manufacturer or a
qualified technician.
Cord extensions or multiple adapters should not be used.
Check that the voltage indicated on the data plate matches that of the installation site.
The unit must have an earthing switch, as a legal requirement for its installation.
Electrical connections must comply with local regulations.
This
RO
M10H20
CAT
dispenser unit has been designed and manufactured in compliance
with the Low Voltage Directive 2006/95 / EC and the protection regulations of the EMC
Directive 2004/108 EMC.
Before maintenance work is carried out on the drinking water supply, the unit must be
disconnected. Rinse the water line before reconnecting the unit.
Comply with all the specific installation regulations of the country in question (eg DIN
1988, EN 1717), as well as hygiene conditions and technical specifications regarding the
protection of drinking water.
The materials of the water dispenser that are in direct contact with the water, comply
with the rules and regulations of the food industry. The
RO
M10H20
CAT
unit dispenser
has been manufactured in accordance with the provisions of the Italian Ministerial
Decree D.M. 174 of 04/06/2004 and D.M. 25 of 02/07/2012.
A regular check of the circuit is recommended.
Be sure to install the unit in a clean, dry and well ventilated room. The
RO
M10H20
CAT
unit dispenser has been designed to work at temperatures between 5 and 32ºC (equivalent
to climatic class N).
THIS DEVICE HAS THE FOLLOWING CERTIFICATIONS
OF THE HIGHEST QUALITY AT THE INTERNATIONAL LEVEL