![ABANTERA ROM10H20CAT Скачать руководство пользователя страница 28](http://html.mh-extra.com/html/abantera/rom10h20cat/rom10h20cat_manual_450754028.webp)
28
|
Install the stopcock to the general drinking water network
and always leave it in the closed position, connect the white
6.5mm polyethylene (PE) tube to the safety coupling of
the pressure valve (included in the
RO
M10H20
CAT
unit)
then connect Another of the 6.5 mm white polyethylene
tubes in the safety coupling at the other end of the
pressure valve, followed by this action, connect this 6.5
mm white polyethylene tube to the water inlet of the
RO
M10H20
CAT
unit.
Installation
Pressure valve
Safety
couplings
Piping of the drinking
water network
Stopcock
(closed)
Waste water out
10
After installation, open the stopcock to enter the drinking water from the network.
Stopcock
(open)
11