ab Naida CI Q90, Руководство пользователя

Страница: 4 / 392

Naída CI Q90 Sound Processor User Guide
3
•
Do not use a ComPilot if recipient has a pacemaker, as there is potential for
interference. Contact a health care professional for more information.
•
Ensure appropriate supervision when child is wearing the Naída CI Q90 sound
processor and accessories.
•
Keep batteries and accessories out of children’s reach as they may pose a choking hazard.
•
If any parts are swallowed consult a physician or hospital immediately.
•
Do not leave children unattended with or allow them to play with batteries.
•
Do not place batteries in your mouth.
•
Do not chew or swallow batteries. If this occurs, seek immediate medical attention.
•
Do not allow children to play with or operate the drying system unattended.
•
Using your sound processor and accessories in a manner other than their
intended use (e.g. placing them in your mouth or chewing them) may cause
bodily harm.
•
Do not recharge disposable batteries.
•
Do not allow leaking battery fluid to come into contact with skin, mouth, or eyes.
•
Do not expose batteries to heat (e.g., do not store in direct sunlight or in a hot car).
•
Do not dispose of batteries in fire.
•
Do not allow children to charge batteries unattended.
•
Do not use any power supply with the sound processor, AB myPilot remote
control or ComPilot unless it is supplied by Advanced Bionics or Phonak. If
needed, contact Advanced Bionics for a power supply replacement.
•
Do not use the AB myPilot or the ComPilot when they are plugged in to power
sources such as wall outlets or USB compatible power sources such as laptops.
•
The ComPilot comes with a neck loop antenna. Do not touch the neck loop
connectors at the same time.
•
Power supplies and battery chargers should be operated in an open area to ensure
adequate airflow. While, to date, no injuries have been reported, components may
become hot during normal use or in the event of a fault. If the device’s temperature
results in discomfort or pain when touched, disconnect the power source and
contact your local Advanced Bionics representative.