background image

8-Port RS422/485 Serial PCI Card

 

 

 

4

 

 

 

   

 

Note: 

1. 

The drivers for Windows are shipped in the following folder 
(E:\IO\OXFORD\RS422_485) of the driver CD. 

The files are in ZIP 

format (e.g. V6515_RS422_485.ZIP). Please copy the file to your hard 
drive C: or what folder you want, unzip it before proceeding with your 
installations. We assumed you copy the file to your hard drive C: root 
directory, and the unzipped folder is V6515_RS422_485. Please do 
NOT use the drivers in its parent directory, E:\IO\OXFORD, since they 
are used for RS232 instead of RS422/485. 

2. 

PLEASE DO NOT LET WINDOWS AUTO SEARCH THE DRIVERS 
AMONG THE FOLDERS

, it will cause problems because the INF files 

will be conflict in this case. Instead, please browse to the correct 
location (folder) manually to make sure the correct drivers are chosen 
and installed correctly.

 

 

 

 
 
 
 

 

 

 

 
 
 

 

4. Driver Installation for Win2000, XP and Vista 

The Zip file is shipped in 

this folder 

Drivers for different OS are 

unzipped to different folders 

 

 

Содержание MSC-108B

Страница 1: ...85 over one single PCI slot 16C950 UART built in 128 byte on chip FIFO Up to 921 6 Kbps baud rate over 700 Kbps data throughput Precise RS485 ATTATM Auto Transceiver Turn Around feature to disable the line driver by hardware Optional 15KV ESD surge protection model is available Supports Windows 98SE 2000 and XP 2003 Vista MSC 108B Installation Guide 1 Introduction 2 Connector and Jumper Layout Ter...

Страница 2: ...Please do NOT change it ECHO NO ECHO ECHO Transmitting data will be echoed back NO ECHO Default No echo data S1H S1L S1L Default Reserved for Future Use Please do NOT change it 422 485 485 Default 2 wire RS485 mode 422 4 wire RS422 mode Please note that if the mode were set at 422 mode the ECHO settings will take no effect The Echo mode is useful for the application program to detect if the RS485 ...

Страница 3: ...tting S1 TERM S2 TERM S3 TERM S4 TERM S5 TERM S6 TERM S7 TERM S8 TERM IN TXD DATA and DATA Termination Resistor Enabled OUT Default TXD DATA and DATA Termination Resistor Disabled Note IN Jumper Installed OUT Jumper Not Installed 3 S1 S4 Connector Pin Assignments The RS422 485 signals are connected by a DB62 octopus cable to 8 DB9 male connectors the DB9 male pin assignment as follows RS485 TXD Te...

Страница 4: ...nd the unzipped folder is V6515_RS422_485 Please do NOT use the drivers in its parent directory E IO OXFORD since they are used for RS232 instead of RS422 485 2 PLEASE DO NOT LET WINDOWS AUTO SEARCH THE DRIVERS AMONG THE FOLDERS it will cause problems because the INF files will be conflict in this case Instead please browse to the correct location folder manually to make sure the correct drivers a...

Отзывы: