AAxeon LNX-1002NM-67-T, Руководство пользователя

Страница: 119 / 141

114
EXEC mode.
Interface
configuration
Enter the
interface
command with a
specific interface
while in global
configuration
mode
switch
(config-if)#
To return to
the previous
mode, enter
exit or end .
Use this mode to configure
parameters for the switch
and Ethernet ports.
System Commands Set
Commands Level Description Example
show config E Show switch
configuration
switch> show config
show terminal P Show console
information
switch# show terminal
write memory P Save user
configuration into
permanent memory
(flash ROM)
switch# write memory
system name
[System Name]
G Configure system
name
switch(config)# system name xxx
system location
[System Location]
G Set switch system
location string
switch(config)# system location
xxx
system description
[System Description]
G Set switch system
description string
switch(config)# system
description xxx
system contact
[System Contact]
G Set switch system
contact window string
switch(config)# system contact
xxx
show system-info E Show system
information
switch> show system-info
ip address
[Ip-address]
[Subnet-mask]
[Gateway]
G Configure the IP
address of switch
switch(config)# ip address
192.168.16.1 255.255.255.0
192.168.16.254