AAxeon LNX-1002NM-67-T, Руководство пользователя

Страница: 103 / 141

98
LLDP Configuration
Link Layer Discovery Protocol (LLDP), a one way protocol, specified in the IEEE 802.1AB
standard allows stations attached to the same IEEE 802 LAN to advertise their
information to neighbors and store the information received from adjacent stations.
Receivers on the same physical LAN will store the information distributed via LLDP in a
standard Management Information Base (MIB) where the information can be accessed
by a Network Management System (NMS) using a protocol like the Simple Network
Management Protocol (SNMP).
LLDP runs on all 802 media. The protocol runs over the data-link layer only, allowing two
systems running different network layer protocols to learn about each other.
The switch also supports LLDP-MED (Media Endpoint Devices) that is the enhanced
standard of the basic LLDP protocol that is specific to the requirements of Media
Endpoint Devices in an IEEE 802 LAN environment. With LLDP-MED employed, the
switch can deal with network configuration and policy, device location, Power over
Ethernet management, and inventory management. Media Endpoint Devices include, but
are not limited to, IP phones, IP voice/media gateways, IP media servers, and IP
communications controllers.

LLDP Protocol : Click the pull-down menu to disable or enable the LLDP function.

LLDP Interval : Type the value in seconds as the interval for the switch to advertise
its information to other nodes.

Click Apply to have the configuration take effect.
LLDP Interface