AAVIX AGT1321, Руководство пользователя

Страница: 26 / 33

PAGE 26
WARNING! If the product strikes a foreign object stop the engine!
Disconnect the spark plug connector, let the product cool down and
thoroughly inspect the product for damage! Have any damage
repaired before restarting!
Extensive vibration of the product during operation is an indication
of damage! The product should be promptly inspected and repaired!
Grass Collection
1. Remove the mulching insert (29) and attach the grass catcher (22). Make
sure the side discharge attachment (14) is not fitted to the mower and the
side deflector guard (15) is in place.
2. Empty the grass catcher (22) regularly.
Mulching
NOTE: Mulching means cutting and returning the grass clippings to the lawn
in one step: The grass clippings are cut very fine and then distributed evenly
back onto the lawn. Under normal conditions, the mulched grass will
biodegrade quickly to provide nutrients to the lawn.
1. Insert the mulching insert (29) into the rear discharge chute (28), make
sure the side discharge attachment (14) and grass catcher (22) are not fitted
to the product and the side deflector guard (15) is in place.
2. Avoid mowing when the grass is wet from rain or dew. Wet grass may
form clumps which interfere with the mulching action and reduce runtime.
The best time to mow grass is late afternoon when the grass is dry and the
newly cut area will not be exposed to direct sunlight.
3. Set the cutting height to about one third of the grass blade length, ideally
no more than 35 mm/1.38inch at one time for best mulching performance. If
the lawn is overgrown, it may be necessary to increase the cutting
height to reduce the pushing effort and prevent the engine overloading.
For extremely heavy mulching, it is advisable to first cut at a high cutting
height, and then again to a lower cutting height. Otherwise, make
narrower cuts and mow slowly.