18
Thread seal tape is recommended for
all threaded connections.
Use of an extension cord is not
recommended.
OPARATION
WARNING:
Do not operate
this unit until you read this instruction
manual for safety, operation and
maintenance instructions.
Checking the Oil
1.
Check the oil level before operation.
Fill the Pump Crankcase with SAE
30W, non-detergent, Air Compressor
Oil (not provided).
IMPORTANT:
Running the Air
compressor with the incorrect
amount of oil will cause damage to
the equipment and void the warranty.
To prevent damage, do not use with
overfilled or low oil. Slowly fill to full
line, wait 2 minutes and fill back up to
full line. Compressor has small
passages that will fill slowly.
2.
The oil level should be at the center
of the “full” level on the oil level
window, as shown above. Add oil as
needed to maintain this level. Do not
let the oil level go below the center
dot (LOW as shown above) and do
not overfill the oil so that it is above
the center dot (OVERFILL as shown
Содержание A12103
Страница 35: ...35 EXPLODED VIEW...