AAVIX A12103, Руководство пользователя

Страница: 16 / 35

16
Overheating. Certain air compressors
can be operated on a 14 amp circuit if
the following conditions are met.
1. Voltage supply to circuit must
comply with the National Electrical
Code.
2. Circuit is not used to supply any
other electrical needs.
3. Extension cords comply with
specifications.
4. Circuit is equipped with a 14 amp
circuit breaker or 14 amp time delay
fuse.
NOTE:
If compressor is connected to
a circuit protected by fuses, use only
time delay fuses. Time delay fuses
should be marked "D" in Canada and
"T" in the US.
If any of the above conditions cannot
be met, or if operation of the
compressor repeatedly causes
interruption of the power, it may be
necessary to operate it from a 20 amp
circuit. It is not necessary to change
the cord set.
Repairs to the cord set or plug MUST
be made by a qualified electrician.
Air Connection Setup
1. Connect a regulator valve, an inline
shut off valve and a 1/4" NPT air hose
to the Quick Coupler (all not
provided ). The air hose must be long
enough to reach the work area with
enough extra length to allow free
movement while working.
NOTE:
An in-line shutoff ball valve is
an important safety device because
it controls the air supply even if the
air hose is ruptured. The shutoff
valve should be a ball valve because
it can be closed quickly.
2. Depending on the tool which you
will be using with this compressor,
you may need to incorporate
additional components, such as an
in-line oiler, a filter, or a dryer (all not
provided), as shown on Figure A and
Figure B. Consult your air tool’s
manual for needed accessories.
A: Air Supply Line Setup
A Air Hose: Connects air to tool
B Filter: Prevents dirt and condensation
from damaging tool or workpiece
C Regulator: Adjusts air pressure to
tool
D
Lubricator (optional): For air tool
lubrication
E Coupler and Plug: Provides quick
connection and release
F Leader Hose (optional): Increases
coupler life
G
Air Cleaner/ Dryer (optional):
Prevents water vapor from
damaging workpiece
H AirAdiustina Valve (optional):
For fine tunina airflow at tool