AAton XTRprod, Руководство пользователя

Страница: 59 / 109

The straightforward design of the DX magazine allows for quick, easy
loading and an absolute minimum amount of threading in the dark.
The film does not need to be cut in preparation for loading.
3.5.1 Feed Side - In the Changing Bag
• Place the film can and the magazine, feed side up, in the changing
bag and zip closed.
• Disable the mechanical footage counter, located on the feed door,
by rotating counter clockwise until it locks in its recessed position.
• Unfasten the feed door lock by turning downward and open the
feed door.
• Remove the film from its can and bag.
• On the feed core holder, squeeze the core lock mechanism on ei-
ther side with thumb and forefinger to release core lock.
• Place the film on the feed spindle with its wind clockwise and
press the center of the core lock to lock the core in place.
• Thread 4" of film around the outside of the lower guide roller and
through large coaxial roller emulsion out. Make sure that the length
of film feeds completely through to the take-up side.
• Close and lock the feed door and engage the footage counter by
rotating clockwise.
59
THE MAGAZINE
Care for your Changing
Bag
A clean and light-tight chan-
ging bag is the only thing se-
parating your precious footage
from a veritable washout. Be-
fore using your changing bag
each day, turn it inside out
and shake it clean of dirt and
debris. It is also a good prac-
tice to periodically inspect its
edges for holes and tears.
Hold it up to a strong light to
check for any pin hole leaks.
aimants