+33 4 7642 9550
www.aaton.com
Cantar-X User Manual v2.26 (r13) 2009 April 27
p.4
p.4
Permanently accessible faders
The Cantar interface is the easiest to use under the most
technically demanding conditions: • It offers the largest
display surface of all portable recorders, which simulta-
neously shows every critical recording parameter. • The
custom designed high contrast displays remain viewable
under bright light (sun, sand, sea, snow, storm), and at
very low temperatures too. • The swiveling front panel
always provides the best viewing angle for both on cart
and over the shoulder work. • The large twelve position
MainSelector eliminates diving into sub-menus. • The
three-crown turret gives instant access to all recording
and monitoring configurations while wearing heavy win-
ter gloves.
• Nine rotary faders (analog inputs) plus six
linear faders (mixdown) devoted to one specific task are
faster to handle than multi-function knobs. • An important
consideration for desert or high seas work: all of the me-
chanical actuators (faders, sliders, buttons, selectors) are
sandproof and waterproof.
DESCRIPTION 1,
TOP VIEW
1
[
lim-inv
] Analog limiter ON/OFF.
[
shift
] [
lim-inv
] Input signal inversion.
2
[
so-fil-tom
] Solo & Filter. Balance access.
[
shift
] [
so-fil-tom
] Phantom 48V ON/OFF.
3
[
link-lock
] Leftside (un)locks Mixer faders
Rightside (un)locks mic/line faders.
[
shift
] [
link-lock
] Links mics.
[SoloMix
Pan
]
pushed to the bAttery side:
[
routing
]
displays the inputs to
trAcks
.
[
track-solo
]
(end of fader button) shows
pAn-pots
.
[
Solo
MixPan]
pulled to the Operator side:
[
routing
]
displays the outputs
to
mOnitors
.
[
track-solo
]
(end of fader button) activates track
sOlo
.
Track
(dis)arming
& solos
HDD
access
Five mic
faders
Four line
faders
SoloMixPan
in & out
routings
Limiter/inverter
1
Solo/filter/phantom
2
Shift
Ethernet
RJ-45
Link/lock
3
Headphones
fader