AAT V-MAX2, Перевод оригинального руководства пользователя

Страница: 17 / 40

17
5 4 Operating and pushing handle
WARNING - The locking pins must engage, otherwise the handles can move abruptly!
WARNING - Always operate with both hands to be able to react appropriately to dangerous
situations. Never mount only one handle.
Pull the locking pins of the
handle mounts.
Plug the handle into the rear
handle mount and snap in the
locking pin.
»
Operating handle on the
right!
»
Pushing handle on the left!
Repeat this process on the
other side.
5 5 Anti-tip supports
WARNING - Never use without both anti-tip supports to prevent the wheelchair from tipping
backwards!
If anti-tip supports are not available on your wheelchair as standard, use AAT anti-tip supports in pairs!
The wheelchair bracket determines which anti-tip supports you require.
Option 1: Bracket with locking bolts
WARNING - Check the anti-tip supports before initial operation to ensure safety!
Remove bracket locking
bolts.
Push the anti-tip support into
the bracket and secure with
the locking pin.
Observe the "R" + "L" mark-
ings! Repeat process on the
other side.
i
Note - When the
V-MAX
2
is not in use, the handles are in their designated mounts and can be
pulled out of them.
i