AAT V-MAX2, Перевод оригинального руководства пользователя, Страница: 18 / 40

18
6 Starting up
Option 2: Bracket with locking pin
Press in the locking pin but-
ton and pull it out.
Push the anti-tip support into
the bracket and secure with
the locking pin.
Observe the "R" + "L" mark-
ings! Repeat process on the
other side.
DANGER - Operation only by a single, trained person. This person must be physically and
mentally able to operate the
V-MAX
2
safely and must not suff er from cognitive impairment!
DANGER - Never use without both anti-tip supports to prevent the wheelchair from tipping
backwards!
DANGER - Avoid parallel journeys on steep hillsides or rails, to prevent the wheelchair from
overturning!
DANGER - Cross over roads, crossroads and railway crossings with increased caution!
DANGER - Avoid driving on slopes with the
V-MAX
2
deactivated, as there is no braking
eff ect when doing so.
DANGER - Do not use on escalators or travellators to avoid injuries caused by a crash or the
falling out of the occupant and the occurrence of damage to property!
WARNING - Practise outdoors on a level surface and at low speed!
WARNING - Drive down slopes at the lowest speed to avoid dangerous situations!
WARNING - Do not drive up stairs or steps to prevent the wheelchair from overturning!
WARNING - Avoid driving in heavy rain, ice, snow and on unsurfaced ground (sand, mud,
loose crushed rock) to prevent slipping!
WARNING - During breaks, when using public transport (buses, trams, etc.) and when chang-
ing seats, switch off the
V-MAX
2
and apply the parking brakes of the wheelchair to prevent it
from rolling away.