6.3
Control light to indicate malfunction
Malfunction is indicated by a blinking light emitting diode. If there is still an
indication of malfunction, charge the batteries in case of low battery charge.
For all other cases of malfunction, please contact your authorized dealer.
In cases of malfunction such as the blinking of 1 – 4 times we consciously
abstained from automatically activating the electro-magnetic brakes as soon
as the malfunction is recognized while the device is driving.
F
If you want to activate the electro-magnetic brake, push the rocker
switch hard to overcome the pressure point and the panic switch is
activated. Then release the rocker switch.
In all other cases of malfunction the electro-magnetic brake is automatically
activated.
6.4
Trouble shooting
If there are problems using the movilino, please check the following trouble
shooting chart and see whether you cannot fix them yourself.
27
movilino
Problem
Check and potential solution
movilino cannot be turned on
Is the charger connected to the movilino?
If so, disconnect the charging cable and plug in the power cable
Is the battery empty?
If so, charge the batteries.
Are the fuses damaged?
If so, exchange the fuses
If there is still a problem turning on the movilino, please contact
your dealer.
Batteries don’t charge
Please contact your dealer
LED is blinking
Type of malfunction
1 x
Malfunction of the motor, the motor controller or the battery pack
2 x
Low voltage, batteries empty
3 x
Overvoltage
4 x
Electro-magnetic brake at fault
5 x
Indicator for excess voltage
6 x
Indicator for overstressing
