3.2
Brackets
The movilino may only be used, if your wheelchair has been supplied with
special brackets.
These brackets may only be mounted by AAT Alber Antriebstechnik or autho-
rized personnel.
3.2.1
Bracket on the wheelchair
The wheelchair must be equipped with a bracket in order to attach the movi-
lino to the wheelchair.
AAT Alber Antriebstechnik GmbH offers a universally applicable mounting
system. We attach a holding device
on both sides of the wheelchair’s fra-
me. This holding device has an upper
and lower
bracket.
All brackets are specially designed for and adjusted to each individual
wheelchair; therefore, the brackets you see in the picture may look different
from your wheelchair brackets.
F
Please check whether the brackets are securely fastened before each
use. Should screw fastenings be loose, you may not use the movili-
no. In such case, please contact your local dealer immediately.
3.2.2
Bracket on the movilino
On your movilino you find an upper
and lower
rod. To adjust the lower
rod's height there are several vertical holes drilled into the housing of the
movilino.
Your authorized dealer or AAT Alber Antriebstechnik GmbH adjusts the
height at which the movilino is mounted to your type of wheelchair.
On both sides of the upper rod there are rings
. The position of said rings
are also adjusted to your type of wheelchair.
14
movilino
5
5
