15
5 4 Control unit
CAUTION - Plug-in contacts must be dry!
Attach the control unit holder.
Slide control unit into holder.
Secure using the ball knob.
5 5 Anti-tip supports
WARNING - Never use without both anti-tip supports to prevent the wheelchair from tipping
backwards!
WARNING - Check the anti-tip supports before initial operation to ensure safety!
If anti-tip supports are not available on your wheelchair as standard, use AAT anti-tip supports in pairs!
The wheelchair bracket determines which anti-tip supports you require. The type of holder you should
attach to your wheelchair depends on the model of your wheelchair.
Option 1: Bracket with locking bolts
Remove bracket locking
bolts.
Push the anti-tip support into
the bracket and secure with
the locking pin.
Observe the ‘R’ + ‘L’
markings!
Repeat process
on the other side.
