KDH
-
KZ6000FR
-
IP
-
Skrócona instrukcja obsługi wer. 1.0
KDH
-
KZ6000FR
-
IP
-
User
’
s manual (short form) ver 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
13
2.7. Starting the terminal
To run the terminal you have to power in from 12VDC power supply compatible with terminal power
supply specification. Additionally, connect the Ethernet cable to the RJ45 network interface of the
terminal and to a network switch.
After connecting power terminal display will turn on. Initialization process takes about 2 minutes.
The recommended way to start and configure terminal is a direct connection to
the network switch
which is not connected to other devices. In the absence of a switch, it is enough to use a cable
connected directly to the computer. To obtain further information about network configuration
parameters (IP address, gateway, network mask, etc.) please contact your network administrator.
•
Connection using network switch
•
Connection directly to computer
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user
‘
s
manual.
START
-
UP AND INITIAL TERMINAL CONFIGURATION
Terminal
Network transmission
Network transmis-
Switch
Computer
Terminal
Network transmission
Computer
Содержание KDH-KZ6000FR-IP
Страница 1: ...User s manual short form KDH KZ6000FR IP...
Страница 31: ...Instrukcja obs ugi skr cona KDH KZ6000FR IP...