Integrated Access Controller –
Installation manual
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
All rights reserved.
9
Installation instruction
1. Unscrew the bottom screw and separate
the rear panel of the controller. Use it as a tem-
plate for the mounting holes. Drill 4 holes for
the mounting screws and one in the middle for
the cables.
2. Attach the back cover of the controller to
the wall. Place the plugs from the wires in the
appropriate sockets and drag them to the other
side of the wall.
3. Mount the controller module on the back
cover. Pay attention to the slot on the top edge
of the controller case and use it as a catch.
4. Push the controller module with the hous-
ing to the back cover and secure it with a screw
from the bottom.
Wall
Back cover
Controller module
Metal cabinet
Gap
