AAT 333225, Перевод оригинального руководства пользователя

Страница: 19 / 44

19
Take a seat in the wheelchair.
Take the operating unit out of
the pocket.
6 2 Tilt sensor calibration
6 1 Switching on the device
Switch on the SERVO -
Press button 1 or 2. The last
assistance level set is called
up.
CAUTION - Always carry out calibration after changes to the wheelchair (replacement of
castors / bracket / drive wheels) or when the user changes / reuses the wheelchair.
If necessary, deactivate the
button lock. First press the

button, then press button 1.
»
The symbol disappears!
Deactivate the hill assist. Set driving program 1 and
the lowest assistance level.
Park the wheelchair on
a horizontal level. Swivel
the castors forward in the
direction of travel.
Switch off the SERVO - Keep
button 1 or 2 pressed.
Press and hold the + and -
buttons simultaneously until
a message appears in the
display.
Remove the drive wheels, mount the right wheel on the left and mount the left wheel on the right.
Switch on the SERVO - Press button 1. Repeat the sequence of this chapter.
Please, switch on the SERVO
only after the occupant has
taken his seat.