AAT 333225, Перевод оригинального руководства пользователя

Страница: 28 / 44

28
10 1 Battery pack and charger
DANGER - Before shipping lithium-ion batteries (repair, disposal, etc.), it is mandatory to inform
your specialist dealer or the manufacturer, as there is increased danger! Special shipping
conditions may require specific packaging, among other things! Your specialised dealer will
receive approved transport containers on request - shipping may only be carried out via the
specialised dealer! (The regulation only applies to the lithium-Ion battery pack)
WARNING - Never short-circuit or connect the poles of the battery pack to avoid
electric shocks!
CAUTION - During the charging procedure, ensure that cables are laid safely to avoid tripping
over them!
CAUTION - Do not attempt to repair or bypass defective fuses to avoid electric shocks!
CAUTION - Protect against moisture to avoid electric shocks!
i
NOTE - Never carry the charger by the charging cable/charging line.
i
NOTE - Charge the battery pack after each use! Exhaustive discharge results in a loss in
capacity and shortens the service life.
i
NOTE - Protect the charger and the motor vehicle voltage converter against oils, greases,
aggressive cleaning agents, thinning agents or damage.
i
NOTE - Observe the user manual for the charger/voltage converter.
i
NOTE - Store the battery pack in a frost-free environment at least one hour prior to start-up
to avoid malfunctions.
i
NOTE - Do not charge the battery near heat-sensitive or flammable materials.
Recommendation: Remove the battery from the charger for long-term storage (or non-use). Carry out
regular trickle charges at intervals of 1 month, then remove the battery from the charger again.
i
Information by the manufacturer: The battery pack is maintenance-free and
rechargeable. New batteries only reach their full capacity after several charging cycles.
During the charging process, SERVO cannot be operated.
Remove the operating unit
from the pocket.
Deactivate the button lock.
First press the

button, then
press button 1.
»
The symbol disappears!
Switch off the SERVO.
»
Keep button 1 or 2 pressed.