Aastra SIP 480i, Руководство администратора

Страница: 488 / 504

How to Create an XML Application
G-18 41-001129-00 Rev 09, Release 1.4.1
IP Phone Administrator Guide
Appendix G
The following example shows an AastraIPPhoneExecute object using the Reset
command:
<AastraIPPhoneExecute>
<ExecuteItem URI="Command: Reset"/>
</AastraIPPhoneExecute>
The following example shows the AastraIPPhoneExecute object using a URL:
<AastraIPPhoneExecute>
<ExecuteItem URI="http://aastraserver/message.xml"/>
</AastraIPPhoneExecute>
When the phone receives this object, it displays the specified XML URI page.
Using the NoOp Command
You can use the AastraIPPhoneExecute object as an object to create a blank
display (it has no affect on the IP phone). It is made up of a blank URI. You can
use this feature when you need to press a key on the phone to access a feature, and
it is not necessary to display anything.
The following example shows an AastraIPPhoneExecute object using a blank
URI:
<AastraIPPhoneExecute>
<ExecuteItem URI=””/>
<AastraIPPhoneExecute>
Note: If you specify a command as a URI attribute (instead of a URL),
the keyword " Command " must be prepended in the value of the URI
attribute so that the phone recognizes it as a URI attribute value. If you
enter a URI and leave out the “
Command ” keyword, the phone interprets
the value in the URI attribute as a URL containing network resources.