Aastra NeXspan C, Руководство по установке

Страница: 37 / 196

AMT/PTD/PBX/0020/2/4/EN 01/2007 Page 37
Definition of the debug screen corresponding to the current base station
Figure 2-7: Debug screen for the current base station of an M90x mobile terminal
• XX: RPN
Indicates the number of base station used by the mobile
• F: Frequency
Indicates the frequency used by the mobile (0 …. 9)
• S: Slot number
Indicates the time slot used by the mobile ( 0…….b)
• QQ: Quality
Indicates the CRC value (value 40h if there is no degradation, 39h if HO request)
• RR: RSSI
Radio level (Value between 35h and 60h for a Max. signal).
• C1C1/R1R1: RPN and RSSI
Indicates best available base station for handover in cell XX
• C2C2/R2R2: RPN and RSSI
Indicates second best available base station for handover in cell XX
• C2C2/R2R2+:
Indicates that on the next page there are more than 3 base stations in cell XX
Use the key to move from one screen to another
• or one arrow indicates that the mobile terminal is in connected mode, two arrows
indicate that the mobile terminal is in a handover phase.
• Indicates that the base station with RPN XX is open for registration.
• Indicates that the base station with RPN XX is saturated (4 channels are occupied).
• MEM, MESS and MENU are displayed to show periodic channel scanning,
not used in the field (Labo)
• This symbol is displayed during a call if the external handover is valid (indicator
of ext. HO received from base station).
C
1
C
1
R
1
R
1
/ C
2
C
2
R
2
R
2
+
B S I
X X F S Q Q R R
Ù