16.2
Replacing the Battery
If the standby time for the cordless phone becomes too low, replace the
battery with a new one. Contact your system administrator or your certified
Aastra Sales partner for information on new batteries. The battery is
connected to the cordless phone in such a way that no miss-contact is
possible.
To replace the battery, do the following (also described in
Figure 10):
1. Open the battery lid and remove the battery.
2. Disconnect the battery cable, and replace with a new battery.
3. Make sure the battery cable cannot be trapped while closing the
battery lid.
4. Close the lid.
Figure 10 Battery replacement
Note:
Do not disconnect the battery unless it needs to be replaced.
16.3
Desk Charger
The desk charger is used only for charging. The charger is delivered with a
plug-in power supply and is connected into an ordinary wall socket.
Figure 11 Desk Charger
Note:
Only use the chargers within the temperature range of 5 - 40º C.
1424_EN_LZT103087.doc Rev B2 2009-09-11
©
Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
82
Содержание DT390
Страница 1: ...1424_EN_LZT103087 doc Rev B2 2009 09 11 DT390 Cordless Phone for MX ONE User Guide...
Страница 8: ......