DBC 422
AND
DBC 425
17
1531-DBC 422 02 Uen B3 2013-12-02
Figure 28:
The software is loaded internally in the phone. This process takes about
15 seconds.
Figure 29:
The phone performs a test to verify operation of the phone circuits.
The next step is to set the IP address to the gatekeeper. To set the IP
address to the gatekeeper in H.323, 7.14 Gatekeeper address on page
46.
If a password or Personal Identification Number (PIN) is to be used for
this extension number, the password or the PIN must be initiated in the
exchange.
In the startup sequence for the phone, the next menu is:
Figure 30:
The next step is to register the phone towards the gatekeeper. The IP
extension must already be initiated in the system. The directory number
used at the previous log on is shown. If the number must be changed,
enter the new extension number. Press
Log on
(F4).
If the emergency call function is disabled the SOS text is not shown. To
enable, 7.38 Emergency call on page 76.
If the gatekeeper requires that a password or PIN must be used, the
following menu is displayed:
