Configure the network settings
1-16
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
13
Enter “
y
” if the timezone is correct, and press <Enter>.
Enter “
n
” if the timezone is incorrect, and press <Enter>.
Note:
If you entered “
n
” at the verification prompt, repeat step 12 to correct the timezone, and then
enter “
y
” at step 13.
The following message and prompts display (after entering “y” at the verification prompt):
Please enter the date and time:
Four-digit year [2005]:
Month [03]:
Day [09]:
Hour [19]:
Minutes [40]:
14
The defaults for the date and time are the current date and time on your PC.
If these defaults are correct, press <Enter> at each prompt without making an entry.
If a default is incorrect, enter the correct value and press <Enter> to continue. In the following
example,
14
is entered for the hour since the default of
19
is incorrect.
Four-digit year [2005]:
Month [03]:
Day [09]:
Hour [19]:
14
Minutes [40]:
The following displays:
Before the following information is configured, please verify the
information below is correct before proceeding.
Date: 2005-03-09 14:40:00
Is this the correct time (y/n) [n]:
(continued)
Step Action
