Connect the power cable
1-8
ATP-CNX-040-01 Rel. 1.3, Doc. Rev. 01.07
CNX System Administrator Guide
Connect the power cable
Ground the chassis
To ground the chassis:
Illustration
Step Action
a
Locate the 3-hole, female, power receptacle on the rear of the chassis.
b
Plug the male, 3-prong connector on the power cable into the power receptacle as
shown in the illustration below.
c
Insert the plug at the other end of the power cable into a grounded power source
(100 to 240 VAC).
Note:
North America: 120 V at 15 A
Europe: 240 V at 10 A
AC power cord
Connect to a grounded 15 A
power source (100 to 240 VAC).
(North America: 120 V at 15 A)
(Europe: 240 V at 10 A)
CONSOLE
10/100 ENET
RESET
T1 / E1
1
2
4
3
2
1
100-240VAC
1.0A 47-63HZ
5
