background image

18

 

Model 

1

 User Guide

Troubleshooting

Why can I only see 4 options 
when the user guide says there 
are 9?

The telephone screen will only 
show 4 options at a time. To see 
more, press the down arrow button 

s

.

How do I remove the stand from 
the phone?

Place one hand on top of the phone, 
and place the other hand on the top 
of the stand. Pull the stand away 
from the telephone. You will have to 
pull quite forcefully, but this will 
not break the stand.

Can I turn the light on the screen 
off?

No. You can only adjust the contrast 
of the display.

Why are Callers not identified 
on the display?

Caller ID

 information usually 

arrives between the 

Þ

rst and second 

ring. Let the telephone ring at least 
once before answering. Make sure 
you subscribe to Caller ID

 services 

from your local telephone company. 

Why can’t I dial a number in the 
Callers List?

You must subscribe to a Caller ID

 

service for names and/or numbers 
to be recorded in the Callers List. If 
the number of the caller is unknown 
or private, you cannot return the 
call. Or, the number may require an 
area code. Press the 

EditNum

 softkey 

to edit the number, then press the 

Dial

 softkey.

Why does the telephone wob-
ble?

Make sure the cords are routed 
properly through the stand, as 
indicated in the Installation section. 
Check that the stand has been 
properly snapped into place. 

What does Hold Msg do?

This is an option available with 
some Call Waiting

 services. When 

you are on a call, and another call 
comes in on Call Waiting, you can 
press the 

Hold Msg

 softkey to send a 

network message to the caller. The 
message will ask the caller to hold, 
and tell them that you will be with 
them shortly. You can then answer 
the call at your convenience. 
Contact your local telephone 
company for activation information.

What does 

A

A

A

Ann

n

nss

s

sww

w

w__

_

_CC

C

CWW

W

W

 or 

S

S

S

Sww

w

wii

i

itt

t

tcc

c

chh

h

h  

 

 

do?

This is an option available with 
some Call Waiting

 services. These 

softkeys allow you to put the 
current call on hold, and answer a 
Call Waiting call. You can then 
switch between calls normally. 
Contact your local telephone 
company for activation information.

What is a softkey?

There are three keys on both the left 
and right side of the display. They  
do different things, depending on 
the command displayed next to 
them. See the section 

“How do I use 

softkeys?”

 for more information.

 

These services may have different names 

in your area. Contact your telephone 
company for details.

D0041-0049-00 E 480e.book  Page 18  Wednesday, June 11, 2003  4:25 PM

Содержание 480E

























Отзывы: